keyword :

        Products Detail
        • Name: Multichip saw blade
        • Number: Multichip saw blade
        • Add time: 2015-06-18
        • Views : 5

        Saw blade details

        Product Name

        Diametermm

        Plate thicknessmm

        A sawmm

        Aperturemm

        Teeth number (teeth)p

        Blade numberT)

         

         

        Saw

        Slice

        105

        1.1

        1.5-1.8

        30

        20

        125

        1.3

        1.6-1.8

        40

        20

         

        140

        1.3

        1.6-1.8

        40

        24

         

        150

        1.3

        1.6-2.0

        40

        24

        3

        160

        1.5

        1.8-2.0

        40

        24

         

        170

        1.3

        1.8-2.0

        40

        24

         

        180

        1.3

        1.8-2.0

        40

        24

         

        205

        1.5

        1.8-2.0

        40

        30

         

        212

        1.7

        2.0-2.2

        40

        30

        3

        230

        1.7

        2.0-2.2

        40

        30

        3

        255

        1.9

        2.2-2.6

        50

        32

        4

        280

        1.9

        2.2-2.6

        50

        36

        4

        305

        2.1

        2.4-2.6

        50

        36

        4

        320

        2.1

        2.7-2.8

        60

        36

        4

        330

        2.2

        2.8

        55

        36

        4

        355

        2.4

        3.0-3.2

        60

        36

        4

        380

        2.7

        3.0-3.2

        60

        40

        4

        405

        2.7

        3.4-3.6

        60

        44

        4

         

        455

        2.8

        3.4-3.6

        70

        40

        4

         

        480

        3.2

        3.8-4.0

        70

        44

        6

         

        505

        3.7

        4.0-4.3

        70

        48

        6

         

        520

        3.7

        4.2-4.3

        70

        48

        6

         

        600

        3.4

        4.2-4.3

        30

        80

        Cutting saw

         

        Remarks

         

        All the equipment can be customized according to customer requirements.

        Use: used in the square, longitudinal cutting logs.

        Applicable equipment: multi chip sawing machine, cutting machine

        Tooth type: the left and right teeth (alternate teeth), flat teeth

        Suitable for cutting material: solid wood, soft and hard wood, wet material

        Special point: the use of imported tool steel finishing as the matrix, Luxemburg alloy knife head. Sharp and durable saving material, improve efficiency, smooth surface.

        Specification type: unit mm

        Correct use method and maintenance of alloy saw blade

        (a) basic requirements:

        1 choose the right blade according to the design requirement.

        2 the equipment should have the safety protection device, such as: protective cover, power off brake, overload protection, etc..

        There are 3 professional operators to install and use, and wear labor clothing, wear protective glasses, ear etc.. 4 operators can not bring gloves, long hair to work under the cap, and pay attention to tie and cuffs, to prevent the occurrence of danger.

        5 away from fire and moisture environment.

        (two) installation requirements:

        1, the equipment is in good condition, the main shaft has no deformation, no radial jump, fixed and firm, no vibration, etc..

        2, check the blade is not damaged, tooth type is complete, the board is flat and smooth, and there is no other abnormal phenomenon, to ensure the use of safety.

        3, the assembly, determine the direction of the blade arrow and equipment spindle rotation direction.

        4, the saw blade installed to keep the axis, chuck and a flange plate clean, flange diameter and the inner diameter of the saw blade consistent, to ensure that the flange and the saw blade closely, the positioning pin is installed, tighten the nut. The flange size should be appropriate, outside diameter should be no less than the diameter of the saw blade 1/3.

        5, the device before starting, to ensure the safety of the, equipment operated by a single person, idling, inspection equipment is turned to the right, there is no vibration, saw blade installed after the first idling for a few minutes, without slipping, swinging or jumping after normal work.

        (three) use requirements:

        1, work, the workpiece should ensure that is fixed, the location for the profile with depth direction, so as not to cause abnormal entry, do not have to exert lateral pressure or curve cutting, feed should be smooth, avoid the impact of the blade contact the workpiece, resulting in fly out of the saw blade is damaged, or the workpiece, the occurrence of accidents.

        2, work, found that the sound and vibration, cutting surface roughness, or when the smell, must immediately terminate the operation, timely inspection, troubleshooting, to avoid accidents.

        At the beginning of 3, cutting and stop cutting, do not feed too fast, avoid breaking and damage.

        4, if the cutting aluminum alloy or other metal, to use a special coolant lubrication, to prevent the saw blade overheating, resulting in paste, and other damage, the impact of cutting quality.

        5, equipment arrangement of chip groove and suction device to ensure smooth, in order to prevent slag into a block, affecting production and safety.

        6, dry cutting, please do not long time continuous cutting, so as not to affect the blade's service life and cutting effect; wet film cutting, water cutting, to prevent leakage.

        (four) saw blade maintenance:

        1. The blade if not used immediately, should be flat or by using the hole will hang up, lay flat on the blade can not be stacked, other items or foot, and to pay attention to moisture, rust.

        2 when the blade is not sharp, the cutting surface is rough, it must be repaired in time. The grinding can not change the original angle, and the destruction of the dynamic balance.

        3 saw blade diameter correction, positioning hole processing, must by the. If the processing is bad, will affect the product use effect, and the possible danger and reaming principle can not more than the original aperture 20mm, so as not to affect the balance of stress.

        4 the grinding of the saw blade should be made by a professional or a manufacturer.

        Fujian Asahi saw Industry Co. Ltd is a high-tech enterprise integrating R & D, production and sales as one of the hard alloy saw blade. Company is located in a beautiful environment, the system has a long history of Hangzhou Zhejiang. Company was founded at the beginning, Asahi people with the purpose of "quality first, reputation first, service first" purpose of the 31, to the quality of market share, to win credibility, with the development of the concept of service all over the world, with a better quality of the optimal price to meet the needs of different customers.

        Company to introduce the world's leading German professional production equipment, the use of Luxemburg hard alloy and steel and other high quality materials, advanced processing technology; strict accordance with ISO9002 management requirements, to ensure the quality of products, to ensure that every piece of factory strict inspection, not to eliminate the principle of factory, to ensure that every piece of the customer is a good product.

        Company employees have professional technical strength and years of experience in the production of sawing. From raw materials to the production of strict control, the company can produce 1000mm following any specifications of different requirements of the alloy saw blade, widely used in wood, aluminum and other non-ferrous metal cutting and processing, has been used in a number of large furniture factory and aluminum alloy processing plant, product quality has been praised. Products throughout the country, including foreign also can according to customer requirements, design and manufacture all kinds of special specifications of hard alloy circular saw blades, and blade of renovation and grinding.

        "Quality innovation, integrity and mutual benefit" is the guiding principle of the enterprise. Asahi people in science and technology innovation, quality management, marketing services and other aspects of perfect. Ensure long-term stability to provide customers with high quality and low price products and services. Sincerely invite all the guests, the truth every day, hand in hand to create brilliant!    

        Key words :

        Comment
         
        Content:
        * Entered characters:0 Word
        Less than or equal500Character
        Posted by:
         
        Less than or equal to 20 characters (including A-Z, a-z ,0-9, Chinese characters, excluding special characters)
        Your e-mail:
         
        Example:example@mail.com
        Telephone:
         
        Less than or equal to 32 characters (including 0-9, -, (,), comma) Less than or equal to 32 characters (including 0-9, -, (,), comma) Contact phone number consists of 0-9,-, (,), and comma
        Address:
         
        Verification code:
           

        There is no corresponding message.

        © fjzxmgjx.com Allright Reserved.
        闽ICP备12017896号
        Power by 300.cn